Reaction Resin Mortar Based on Pure Epoxy
The TP E SD+ mortar is a 2-component reaction resin mortar based on a pure epoxy and will be delivered in an exclusive 2-C cartridge system. This high performance product may be used in combination with a hand-, battery-, or pneumatic tool and a static mixer. It was designed especially for the anchoring of threaded rods, reinforcing bars or internal threaded anchor rod into concrete (also porous and light).
The TP E SD+ mortar product is characterized, by a huge range of applications with an installtion temperature from +0°C and a service temperature up to 72°C as well as by high chemical resistance for applications in extreme ambiences e.g. in swimming pools (chlorine) or closeness to the sea (salt).
The wide range of certificates, national and international approvals, allows nearly every application.
Item Number + Size
TP 1155-1 Size: 585ml
Properties and Benefits
- European Assessment acc. to EAD 330499-01-0601 (Option 1, Annex E – TR 049, Seismic C1 and C2): ETA-21/0172
- European Assessment acc. to EAD 330499-01-0601 (Annex C – Additional provisions for working life of 100 years): ETA-21/0172
- European Assessment acc. to EAD 330087-00-0601 (rebar): ETA-21/0171
- US-approval listing acc. to AC 308 in concrete (ICC-ES): ESR-4832, ASTM C881
- Certificated for drinking water applications acc. to NSF Standard 61
- For heavy anchoring – anchoring and post-installed rebar connection
- Fire resistance Test Report 22124, tests performed acc. to DIN EN 1363-1:2012 and Technical Report 020
- Overhead application
- Suitable for attachment points with small edge- and axial distances due to an anchoring free of expansion forces
- High chemical resistance
- VOC Tests: acc. to Leed, French D.cret n°∆2011-321;
- Less critical ingredients; future-proof for more strict REACH regulation
- Low odour
- High bending and pressure strength
- Cartridge can be reused up to the end of the shelf life by replacing the static mixer or resealing cartridge with the sealing cap
Applications and Intended Use
Suitable for facades, roofs, wood construction, metal construction; metal profiles, column, beam, console, railing, sanitary devices, cable trays, piping, post-installed rebar connection (reconstruction or reinforcement), etc.
- Base material:
cracked and non-cracked concrete, light-concrete, porous-concrete, natural stone (Attention! natural stone can discolour; shall be checked in advance)
- Anchor elements:
Threaded rods (zinc plated or hot dip, stainless steel and high corrosion resistance steel), reinforcing bars, internal threaded rods, profiled rod, steel section with undercuts (e.g. perforated section)
- Temperature range:
+5°C up to +40°C installation temperature
cartridge temperature min. +5°C; optimal +40°C
-40°C to +72°C base material temperature after full curing
